The PICAXE 40X text seems to be embedded into the symbol data When downloading the library files for use remember to change the file extensions back to. The text is part of the component on the 40X and can be changed in the component editor.Īre you having difficulty placing text to line up accurately and closely with the component pins. The easiest way to adjust the text placement is to change the grid size to something like 0.001", move the text then change the grid size back to a standard 0.10" or 0.05" grid. In the Mycroft schematic symbols library, note that one of the pcb patterns for the stereo jack was meant to be a generic footprint, just a 3 pin header. There is a separate component symbol for the pcb mount jack that Rev_Ed uses. The standard DIPTRACE supplied libraries contains some components such as logic gates and the IDC type headers listed as 2 x 7 and 2 x 8 in male and female. If selected, they show up okay as a PCB footprint, but when placed only one half of the connector is shown on the schematic with each insertion.ġ. To place all parts on the schematic simultaneously, you will find in the upper left corner of the schematic editor is a check box, "Place all Parts" placing multiple symbols and then identifying as part 1 and part 2 in the properties.Ģ. That will automatically put all the parts of a component on the sheet at one time, otherwise YOU CAN select which part from the box above.Continuing from part 1 of this ATtiny2313 breadboard header with DipTrace -tutorial, I’ll now go through the PCB design. In DipTrace Schematic Editor, I used File->Convert to PCB (CTRL-B) to get the components and connections exported to PCB Layout tool.
0 kommentar(er)
